TDS HD-uDTA-E, Быстрый старт

Страница: 5 / 12

4 5
Remote Control Remote Control
TV Input
*
Toggle TV Input
Info
View the channel name
and number, date and time
Page Up
Now & Next page up
Menu
Display the Main Menu
OK
Select a highlighted item within
Menus. Display channel name
and number, date and time
Volume
Audio up & down
Guide
View Now & Next
Yellow A
Toggle to secondary language
(if available)
*TV must be programed with the remote
LED Indicator
Button press and special
command indication
TV Power
*
Turn your TV on or off
Last
Return to the previous channel or menu
Exit
Return to watching TV
Page Down
Now & Next page down
Channel
Channel up & down
Mute
Sound on & off
Red C
Toggles through available closed captioning
Setup
Program your remote control to your Set-Top
Box and TV
Note
• When inserting
batteries, make sure
that the polarity (+/-)
is correct.
• The LED on the top of
the remote is a visual
indicator that confirms
the remote has
power when a button
is pressed.
• Your remote may vary
slightly from the one
pictured here.
However, basic
functions should
remain the same.
Remove remote
control pairing
If you would like to
use your remote
control for a different
set-top box, you
must first un-pair the
remote control from
the current device.
Follow the steps
below to remove
the pairing.
1 Press and hold the
Setup button until
the LED Indicator
turns green.
2 Enter 9-8-7 on the
remote control.
3 The LED Indicator will
blink green twice.
Pair your remote control with your HD Set-Top Box
1. Press the Menu button.
2. Select Remote Control and then select
Remote Control Pairing.
3. Press and hold Setup button until the
LED Indicator turns green.
4. Press the Menu button.
Please allow a few seconds for the menu to display
5. Proceed by entering the pairing code displayed
in blue on the pairing code pop-up screen.
Note: If you don’t see a pairing code screen, repeat steps 1 and 2.
To force remote control to send volume
control commands to the TV
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume up button
To force remote control to send volume
control commands to the HD Set-Top Box
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume down button
Installing your HD Set-Top Box out of sight (pair remote)
Your remote control can be paired directly with your HD Set-Top Box, allowing you to place the
device out of sight (in an entertainment center or behind your TV, for example). Once your remote
is paired to a specific HD Set-Top Box, it will not control any other set-top box in your home.
Note: Refer to the Remote Control Programming and Operating instructions, provided with your remote control, to program your remote to
work on your TV and for more detailed information regarding pairing your remote.