TDK VCS-04, Руководство пользователя

Страница: 18 / 30

CW/CCW: This is used for turntables to turn the table clockwise or counter-
clockwise
ZOOM: This is used for cameras to zoom in and out
UP/DOWN: This is used for masts to make the mast go up and down
X/ θ : This is used for x-y positioners and the manipulators
PAN: This is used for cameras to pan left and right
Y/ φ : This is used for x-y positioners and manipulators
TILT: This is used for cameras to tilt up and down
The following sections describe in detail how each different page is operated.
Menu Page
Press F1 to control this camera
Press F2 to control this camera
Press F3 to control this camera
Press F4 to control this camera
The main menu can always be reached by pressing the “MENU” key. This screen allows the
user to easily maneuver through the different SI-300CC modules. The SI-300CC can be
configured with as many as 4 different modules. These modules will be displayed on the right
hand side of the screen. The module page can be accessed by pressing the corresponding “F”
key. While in the menu page the “NEXT” key can be pressed to access the SI-300CC options
page.
Options Page
Go to Main Menu
Go to GPIB Page
Go to
Configuration Page
The options menu can always be reached by pressing the “NEXT” key while in the main
menu page. This screen allows the user to easily maneuver through the different SI-300CC
options.
The abbreviations and functions present on the menu screen are:
TDK RF Solutions
Video Camera System User Manual 12