TDK VCS-04, Руководство пользователя

Страница: 23 / 30

CHAPTER 4
Remote Programming
The SI-300CC can be remotely programmed using an IEEE-488 bus. The address setting is
done on the GPIB ADDRESS page of the SI-300. This page can be selected by pressing F2 in
the Main Menu page. The address is displayed during power up and on the GPIB ADDRESS
page.
SI-300CC System Commands v1.3EL
COMMAND FUNCTION
*RST RESETS SI300
SI : MODULE Returns to the Main Menu (Module) Page
SI : MENU Returns to the Options Page
*IDN? Returns “SI-300 SYSTEM INTERFACE”
SI : CONFIGX : CHZ Configure Channel Z with module X (hex value)
Module #(hex)
0 VC-03
1 VC-04
2 FP4000
3 FP600
4 PP02-X
5 PP02-Y
6
Local Switch Module
7 Remote Switch Module 1
8 Remote Switch Module 2
9 Remote Switch Module 3
A Preamp
B N/A
SI : CHZ Changes to the module page on channel Z
SI : Q : CHZ Returns module number on channel Z in hex format: 0
to 9 then A to B
“M=2” module on channel x is an FP4000
TDK RF Solutions
Video Camera System User Manual 17