34
No.
Control/Indicator
Description
16
PREV Button
/
Indicator
Press the PREV button to display the Output Voltage and Current Limit
settings.
The display shows the settings for 5 seconds.
If buttons are not pressed for 5 seconds, the display returns back to show
actual output voltage and current.
If Voltage or Current values are changed, and there is no keypress for 15
seconds, the display returns back to show actual output Voltage and
Current.
Green LED lights when PREV mode is active.
17
OUT
Button
/
Indicator
Output ON/OFF control. Press OUTPUT to set the output ON or OFF.
Green LED lights when DC Output is enabled.
Red LED blinks in case of an alarm. Refer to User Manual, Alarms and
Protective Functions section.
Table 2-1: Front Panel Controls
NOTE
* If a menu is active, and there is no key press within 15 seconds, power system returns to the main
display (OFF or actual Voltage and Current display).
2.3
Front Panel Display and Indicators
for description of the Front Panel display and indicators.
Figure 2
–
2: Front Panel Display and Indicators
No.
Control/Indicator
Description
1
Voltage Display
4-digit 16-segment Voltage display.
Normally displays the output voltage.
In preview mode, the display indicates the program setting of the output
voltage.
In menu navigation, the display indicates the selected function.
2
Operation Mode Indicator
CV/CC/CP operation mode indicator.
Содержание GBSPS10-3000
