TDK-Lambda GBSPS10-3000, Руководство по безопасности и установке продукта

Страница: 42 / 79

36
No. Control/Indicator Description
14 OPT Indicator Optional communication type indicator.
Optional communication type is selected.
15 TRIG Indicator Trigger Indicator.
TRIG is on if the trigger-in is enabled and initialized.
Power supply is ready to receive trigger-in signal.
16 Active Memory-Cell
Indicator Display active memory cell.
1,2,3,4 – A sequence is loaded from cells 1,2,3 or 4
_ - A sequence is loaded from a PC
The Indicator is blinking if a sequence is running.
Table 2-2: Front Panel Display and Indicators
2.4 First unit Blank Front Panel
Refer to
Figure 2
– and Table 2- for description of the Blank Front Panel controls and Indicators.
Figure 2 – 3: Blank Front Panel Controls
No. Connection Description
1 Power Switch POWER ON/OFF control.
2 Manufacturer logo TDK-Lambda logo.
3 Power LED Power system ON/OFF status LED.
Green LED lights when Power system is ON (Power Switch ON).
4 REM LED REMOTE status LED.
Green LED lights if power system is controlled by a remote communication
(RS232/485, USB, LAN, OPTional).
5 OUT LED Output ON/OFF status LED.
Green LED lights when DC Output is enabled.
Red LED blinks in case of an alarm. Refer to User Manual, Alarms and
Protective Functions Section.
Table 2-3: Blank Front Panel Controls