TDK-Lambda G/P-2U-10V Скачать руководство пользователя

Страница: 18 / 20

For load wires with a diameter greater than 11 millimeter divide each bus bar cover plug into two separate

parts by bending and breaking it along its separate grooves, as illustrated in Figure 20. Insert only the

rounded parts into the bus bar protection bracket and fix it to the output cover using two SEMS screw.

Insert output cover assembly through the cables as illustrated in Figure 20.

Figure 20: Two 60V÷100V Units, Wire Diameter

11mm, Output Cover Assembly

Assemble one lug on each bus bar using one hexagon bolt, two plain washers, one helical spring-lock

washer and one hexagon nut as illustrated in Figure 21.

Figure 21: Two 60V÷100V Units Lugs Assembly

Separate Grooves

Bus Bar Protection Bracket

Bus Bar Cover Plug

M3 x 8 SEMS Screw, Nickel Plated

Tightening torque: 4.7-5.7 Lbf-inch (0.53-0.64Nm)

Output Cover

Output Cover Assembly

For recommended lugs refer

series Safety &

Installation Manual.

Not supplied.

Hexagon Nut, M8, Stainless Steel

Helical Spring-Lock Washer, M8, Stainless Steel

Plain Washer, M8, Stainless Steel

M8 x 25 Hexagon Bolt, Stainless Steel

Tightening torque: 106-132 Lbf-inch (12-14.9 Nm)

Содержание G/P-2U-10V





















Результаты поиска

Содержание G/P-2U-10V

Отзывы:

Похожие инструкции для G/P-2U-10V

Бренды по названию

Популярные бренды

TDK-Lambda G/P-2U-10V, Инструкция по эксплуатации

Результаты поиска

Содержание G/P-2U-10V

Отзывы:

Похожие инструкции для G/P-2U-10V

Бренды по названию

Популярные бренды