1. Scope
This document specifies the cable assembly procedures of crimping the crimp contact to
the cable and inserting the contact to the crimp case for DF53 Series.
This document contains general guideline and operating suggestions to use this product
safely. If this product is used another way from being written in this document, unexpected
trouble such as connector breakage could happen. Please read through this document and
understand proper operation before using.
2. Part Number
*
: Number of position.
3. Cable Assembly Procedure
3.1. Cable Stripping
Follow the Crimping Quality Standard (ETAD-H0921), and strip the cable jacket.
Make sure that there is no damage on the center conductor of the cable.
3.2. Crimping Process
Crimp the contact by using the applicator (AP105-DF53-32P).
Confirm that the crimp height and configuration meet the crimp condition and Crimping
Quality Standard (ETAD-H0921).
3.3. Crimped Contact Insertion to Crimp Case
Hold the cable of crimped contact and insert to each contact cavity of the crimp case.
(Insertion direction is as shown below.)
Part No.
Description
Remarks
DF53-32PCF
Crimp contact
Compatible cables : AWG 32 (
ϕ0.4mm MAX)
DF53-
*
P-0.6C
Crimp case
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
1
2
DIS-H-00009693
TH.SATO
TT.OHSAKO
20210610
TITLE
DF53 Series cable assembly procedure
APPROVED
HS.OKAWA
20200407
CHECKED
ST.WADA
20200407
DESIGNED
TH.SATO
20200407
WRITTEN
TH.SATO
20200407
TECHICAL SPECIFICATION
ETAD-H0995-00
1
1 /
5
FORM HC0011-9-1
HIROSE ELECTRIC CO.,LTD.
△
△
Before insertion
After insertion
Insertion direction
Crimped contact
Crimp socket
