16
1.4.3.2
Installation Steps
1.
Attach connection plates, one on each side of the power supplies, using eight pan head screws, eight helical
spring-lock washers and eight plain washers as illustrated in Figure 16.
Figure 16: Two
60V÷100V
Units Connection Plates 2U Assembly
2.
Attach output short plates, one on each pair of terminals, using four flat head screws as illustrated in
Figure 17.
Figure 17: Two
60V÷100V
Units Output Short Plates Assembly
Connection Plate 2U
Plain Washer, No. 10, Stainless Steel
Helical Spring-Lock Washer, No. 10, Stainless Steel
10-32 x 5/16 Pan Head Screw, Stainless Steel
Tightening torque: 25.4-31.7 Lbf-inch (2.87-3.58Nm).
M3 x 4C Flat Head Screw, Nickel Plated
Tightening torque: 4.7-5.7 Lbf-inch (0.53-0.64Nm)
Output Short
