DKC1500 SERIES SLIDING GATE OPERATOR USER
’S MANUAL
4
4. Working principle and main structure
The device is composed of a single-phase motor, worm and worm gear. The main shaft of the
motor rotates the worm with the clutch engaged, the worm rotates the worm gear and output
gear, which pushes rack attached to the sliding gate, thus moving the gate. The dimension is
shown in Fig.1.
Fig.1
5. Manual operation
In case of power failure use manual release key to open or close gate manually, use the release
key as follow:
Fit the release key in the lock.
Turn the key about 4-6 circles anticlockwise.
Open or close the gate manually.
Note: If the gate bumps the mounting post and cannot be electric opened, move the gate a few
inches by hand, thus you can release the gate with the key, open or close the gate manually.
Fig.2
6. Packing list
After receiving the product, you should make an unpack-inspection, in which you should check
whether the product was damaged. If you have any problem please contact our sales agent. You
should find the following items in our standard packing:
