2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
19
19
Configuration
System Screen
The SYSTEM Screen displays the following information:
•
State: The current system state, as shown on the HOME screen
•
Schedule:
The active setpoint pair
•
Next Schedule: The next schedule change and the time it will occur (within 24 hours)
•
Cool and Heat Setpoints:
The setpoints currently in use
•
Service Status: Displays the number of currently active Service Statuses, if any. If there is an active Service Status,
touching the SERVICE STATUS button brings up the SERVICE STATUS screen.
•
Inputs: The room temperature plus Information from external sensors, e.g., outside temperature, humidity, CO
2
, etc.
NOTES:
Inputs for Mixed Air and CO
2
are only available on
4X4X 4X5X
Input for Humidity is only available on
4X5X
•
Relay Outputs: The current state of heating, cooling, and fan operation.
Advanced Status Screen
Status Section Advanced Screen Example
The ADVANCED STATUS screen displays the following information:
Operating Modes:
Whether the UbiquiSTAT is in conventional HVAC or heat pump mode, system status, and fan operation
mode
Digital Inputs: Status of DI1, DI2, and DI3 inputs
Economizer:
4X4X 4X5X
Whether the Economizer feature is enabled, if free cooling is available, and whether Freeze
Protect is active.
Analog Inputs and Outputs: Signal values of analog inputs AI1 and AI2, and analog outputs AO1 and AO2 are on.
Status Section Network Screen Example
Wi-Fi Status Subsection Screen
