TCS TCF EVO Line Скачать руководство пользователя страница 10

Страница: 10 / 133

TCF EVO Line and TCF X Line

Use and mode of operation

2.0

Use and mode of operation

2.1

Intended use

•

The TCF EVO Line is exclusively intended for sorting fasteners
(e.g. screws), separating them and feeding them to a tool.

•

The TCF EVO Line may only be used if the feed hose through
which the fasteners are transported is connected to a tool.
There is a considerable risk of injury if the feed hose is not
properly connected.

•

For the intended use, observe the technical data (see
chapte r3.0, page 13).

•

The TCF EVO Line is to be used in closed rooms where the units
cannot heat up above 45 °C.

•

Unauthorised structural changes, additions or conversions to the
TCF EVO Line are prohibited and will void the warranty.

•

Intended use also includes observance of these operating
instructions.

•

Technik Center Schraubsysteme GmbH is not liable for damage
resulting from improper use.

Содержание TCF EVO Line






































































































































Результаты поиска

Содержание TCF EVO Line

Отзывы:

Похожие инструкции для TCF EVO Line

Бренды по названию

Популярные бренды

TCS TCF EVO Line, Оригинальное руководство пользователя

Результаты поиска

Содержание TCF EVO Line

Отзывы:

Похожие инструкции для TCF EVO Line

Бренды по названию

Популярные бренды