2800 Laura Lane • Madison, WI 53562 | 800.288.9383 • fax: 608.836.9044 | www.tcsbasys.com
11
DEVICE
CONFIGURATION
COMMUNICATION INFORMATION
This section contains settings which control how the QD2040c connects out through the LAN or WAN to the Internet.
All of these settings are determined by your local network administrator or IT department. The correct settings, network
permissions, and port openings (WAN Outbound, ports 80, 443, 8443) need to be verified with them prior to installation
and connecting to the local network.
Communication Options
The QD2040c supports both static IP and Dynamic Host Configuration Protocol (DHCP) IP address allocations. Enter the
Central Server Location, typically www.ubiquitysystems.net by clicking the “Set Ubiquity Domain Name” button. Select
whether to enable or disable special options. Enter host name if needed (typically left blank).
Network
Select the desired IP allocation (DHCP or static IP addressing) to be used. When using static IP, it is necessary to enter
the IP Address, Gateway, Subnet, DNS1 and DNS2 settings. The IP settings will need to be established by the LAN/ WAN
network administrator prior to installation. When utilizing DHCP addressing, the IP address settings are automatically
assigned when communication is established.
