
12
07/2012
TCS TürControlSysteme AG
Subject to technical changes.
E-Mail: [email protected] www.tcsag.de
PI_ISH3130-uk.doc
1A
voice volume
Turn the ring tone volume control when a voice communication is
established (preset ex works: volume level 6 out of 8).
ring tone volume
Turn the ring tone volume control when the handset is cradled, no
voice communication (preset ex works: volume level 7 out of 8).
Configuration options
function
manually
TCSK-01
configo
TM
as of version 1.6.x
ring tone volume
x
–
–
voice volume
x
–
–
select ring tones for door calls in-
ternal calls and floor calls
x
–
x
ring tone for door call 2
–
–
x
parallel allocation
–
x
x
control function 8 /internal calling /
call diversion / door release auto-
matic
–
x
x
floor door function* ON/OFF
–
–
x
send sender serial number in case
of an internal call
–
–
x
change audio AS limit
–
–
x
block ring tone output
x
–
x
block ring tone selection
–
–
x
unlimited communication time
–
–
x
reset to factory setting
–
–
x
* If the floor door release function in the EEPROM has been activated and the door release automatic function via
function key is switched on simultaneously, the control function 11 is send automatically when pressing the floor push
button. If the door release automatic is switched off, the standard floor door release function is realised when press-
ing the floor push button.
Programming with the Service Device TCSK-01
The indoor station is acting as a telephone.
Use the commands
“8“ to make configurations (see
product information Service Device
TCSK-01
).
search telephones
switch on parallel call
switch off parallel call
Ser. no. = the serial number of the indoor station which is to be configured anew
ParSNo. = the serial number of the indoor station, to which the new configured indoor station is allocated to
0