05/2013
9
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
•
Mail: [email protected]
PI_FVM1000-0400_uk.doc Version: 1
error cause
indication
error mode
error tone
solution
SD card is missing, de-
fect or full
LED, red
flashes
plug-in or change the SD card
a- and P-wire are inter-
changed or short circuit-
ed
exchange a- and P-wire or eliminate short-circuit,
LED expires
a-wire is not connected
or not supplied
connect a- resp. M-wire or establish power sup-
ply, LED expires
button WE is stuck
(press longer than 15 s)
loosen button, device is in stand-by mode again
Only in one-family-home and basic mode: set the function key of the indoor station
!
The function key of the indoor station must be assigned with the control function 8.
The control function 8 is not allowed to be used anywhere else in the TCS system.
Configuration
Configuration options
function
manually
infrared remote
control
configo
TM
(as of version 1.6.xx)
set the operation mode
-
x
x
set delay time for automatic record-
ing
-
x
x
set the number of images for the au-
tomatic images series after a door
call
-
x
x
determine the video-AS-address for
the automatic recording
-
x
x
encoding for image buffering on / off
-
x
x
reload to factory settings
x
x
x
set time, date
-
x
x
change the master code
-
x
x
The configuration of the FVM1000 is realised via the integrated IR-receiver and an IR re-
mote control (enclosed) or with the configuration software configo™.