05/2013
13
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
•
Mail: [email protected]
PI_FVM1000-0400_uk.doc Version: 1
Set the operation mode
Initiate the pro-
gramming
if not already realised
Enter
…
* 0 # operation mode #
operation mode
(WE = 0)
= 0 one-family-home mode
= 1 basic mode or
= 2 comfort mode
Set the operation mo-
de
•
A positive acknowledgement tone sounds,
yellow LED lights up for 3 s.
•
then the yellow LED blinks.
Invalid value
A negative acknowledgement tone sounds
when pressing the #-button.
The yellow LED blinks fast for 3 s,
then blinks again.
Train serial numbers of indoor stations
Initiate the
programming
if not already realised
Enter
…
* 1 # SNo 1 # SNo 2 #
•
max. 32 serial number pairs can be trained
1)
•
always enter SNo 2 = 0, if only SNo 1
should be trained
(SNo = serial
number)
Serial number trained
•
A positive acknowledgement tone sounds,
the yellow LED is ON for 3 s
•
then the yellow LED blinks
An index is created on the SD card and the
entry is stored.
Train further serial
numbers
Repeat
•
invalid value
•
already 32 serial
number pairs are
stored
•
SNo 1 is already
trained
A negative acknowledgement tone sounds
when pressing the #-button.
The yellow LED blinks fast for 3 s,
then blinks again.
1) For the programming of the image buffer it is irrelevant, if these serial numbers were programmed together to one bell
button or if the second video indoor station was allocated to another video indoor station by parallel connection.