4
05/2013
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
•
Mail: [email protected]
PI_FVM1000-0400_uk.doc Revision: 1
Safety instructions
!
Mounting, installation, repair and commissioning have to be carried out only by quali-
fied electricians!
For working on systems with a main connection of 230 V alternating voltage, the safety
regulations according to DIN VDE 0100 must be observed.
When installing TCS:BUS systems, the general safety regulations for telecommunication
systems according to VDE 0800 (and EN60950 International Safety Standard for Infor-
mation Technology Equipment) must be observed:
•
separated conduit of heavy and low current lines,
•
minimum distance of 10 cm in case of a common conduit,
•
use of separators between heavy and low current lines within shared cable ducts,
•
use of standard communication lines, e.g. J-Y (St) Y with 0.8 mm diameter,
•
existing lines (modernisation) with deviating cross-sections can be used in compliance
with the loop resistance.
!
With suitable measures to protect against lightning, it has to be ensured that a voltage
of a each 32 V DC at the TCS:BUS wires a and b must not be exceeded.
Device overview