18
05/2013
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
•
Mail: [email protected]
PI_FVM1000-0400_uk.doc Revision: 1
Setting the time
Initiate the
programming
if not already realised
Enter
…
* 96 # hh # mm # ss #
hh = hour, mm = minutes, ss = seconds
(Stunde: 00 bis 23)
Encoding is set
•
A positive acknowledgement tone sounds,
the yellow LED lights up for 3 s
•
then the yellow LED blinks
Invalid value
A negative acknowledgement tone sounds
when pressing the #-button.
The yellow LED blinks fast for 3 s,
then blinks again
Reload to factory settings
!
Attention! When reloading the factory settings all images are deleted, the master code
and all settings will be reset.
Initiate the
programming
wenn noch nicht erfolgt
Enter
…
* 99 # master code # master code #
master code = number with 6 digits (unique
master code or master code ex works)
Factory settings
loaded
•
A positive acknowledgement tone sounds,
the yellow LED lights up for 3 s
•
then the yellow LED blinks
Incorrect entry, un-
known master code
A negative acknowledgement tone sounds
when pressing the #-button.
The yellow LED blinks fast for 3 s,
then blinks again