12
05/2013
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
•
Mail: [email protected]
PI_FVM1000-0400_uk.doc Revision: 1
•
Every keystroke with the infrared remote control is confirmed by the image buffer with a
short button acknowledgement tone (
).
Initiate the programming
Authorise via
infrared remote control
The keystroke is confirmed by the device with
a short button acknowledgement tone.
Enter the mastercode
…
LED, yellow is OFF.
* Master code #
(WE = <serial number of the FVM1000 with 6
digits>)
Device is ready for
programming
•
A positive acknowledgement tone sounds,
LED, yellow lights up for 3 s.
•
LED, yellow blinks then.
Incorrect input, un-
known master code
A negative acknowledgement tone sounds
when pressing the #-key.
The LED, yellow blinks fast for 3 s,
then expires again.
No inputs
The code can be entered incorrectly only 3
times, then the code input is blocked for 2
min., an input is impossible:
The LED, yellow lights up for 2 min,
then expires again.
Start from the beginning again.
If no instruction was entered for 2 min, the
device ends automatically its programming
mode, the yellow LED expires.