TCS FBI6100-0400, Информация о продукте

Страница: 4 / 16

4 02/2014
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de Subject to technical changes.
www.tcsag.de PI_FBI610x_uk 3 A
28|29|30
a/b/P
connection TCS:BUS
PASSIVE Only operation mode PASSIVE !
The supply voltage for the TCS:BUS is provided by an
additional power supply and control unit.

This operation mode is selected if the SIP-Gateway
is integrated into e.g. a video system, a system with
several front-door stations, resp. if the system
which is to be supplied exceeds the power output of
the SIP-Gateways.

Terminals are short-circuit protected.
21|22
Door release relay
(potential-free relay
contact
– closing con-
tact)

door release voltage via bridge terminal 20 to 21

12 V, 50/60 Hz / 2 A (for door opener not less than
6 Ohm)

door release time can be adjusted: 0 to 99 sec

function can be adjusted via web interface
26|27
Internal light switch
relay (potential-free
relay contact
– closing
contact)
To control automatic light switching units,
the following extensions can be connected:

automatic light switch unit (max. permitted contact
load capacity of 24 V DC / 1 A)

staircase light control unit FNA1000 (or TZ1-SG)
(with 8 - 24 V AC)

relay

adjustable light switch time: 0 to 99 sec

adjustable function via web interface
RJ45 socket

connection for network (PC/Laptop) 10/100 Mbit
RUN/PROG push
button Only operation mode ACTIVE !

Switching of the system mode:
operation mode
– programming mode
RUN
PROG
RUN/PROG indication
(LED orange)

indication of the system mode:
is ON : operation mode
blinks : programming mode
ERR
error indication at
TCS:BUS (LED red)

flashes : error in the connection to the TCS:BUS
(see page 8)

flashes OFF : error in the network connection (see
page 8)
2
indication operation
voltage (LED green)

is ON : operation voltage is present
3
indication status voice
connection (LED or-
ange)

indication voice connection or connection estab-
lishment FBI610x to an external device
4
error indication SIP
(LED red)

is ON : start process (around 40 sec) or no connec-
tion to the SIP server (see page 8)
status indication (LED
green)

blinks: if data is sent or received via LAN

is ON : connection FBI610x to the network is estab-
lished
status indication (LED
orange)

is ON simultaneously green with status indication :
no connection to the network