6
02/2014
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
www.tcsag.de
PI_FBI610x_uk 3 A
Intended use
The FBI610x is an interface for the connection of TCS front-door stations to a VoIP net-
work as end device (client) via Session Initiation Protocol (SIP).
The SIP-Gateway can be used generally in 2 operation modes at the TCS:BUS: opera-
tion mode ACTIVE
or
operation mode PASSIVE
.
Short description
providing the voltage supply of 24 V DC (for TCS:BUS, only operation mode ACTIVE)
switching of the system mode between operation and programming mode,
LED indication (only in operation mode ACTIVE).
automatic detection of the operation mode PASSIVE or ACTIVE
potential-free relay contacts (closing contacts) to control automatic light switch units /
door opener
single speech channel:
Communication from front-door and indoor stations to more than one call destination is
not possible simultaneously.
optical indication for voice connection and operating voltage
error detection and indication for TCS:BUS and network errors
Connect the lines
Notes
Mounting, installation and commissioning must be carried out only by IT professionals!
!
Use a small screwdriver to connect the lines and to avoid damaging the device.
Connect the TCS system
Strip the ends of the lines.
Connect the TCS system to the FBI610x depending on the operation mode and the type
of system completely and according to the wiring example.
Connect the network
Establish a connection between the RJ45 interface at the FBI610x and your network by
using a patch cord.
