11.4
Encoder 2
Video > Encoder 2
11.4.1
Edge recording
Configuring Encoder 2 settings is done in the same way as for Encoder 1. It is important to
bear in mind, however, that edge recording uses video generated by Encoder 2 and that this
requires specific Video bit rate, GOP length, and Bit rate settings.
Important: If you change these settings, edge recording may become impossible.
Warning: Incorrect encoder settings for edge recording
To configure settings for edge recording
1
Select Enable to enable the encoder.
2
On the Profile list, select H.264 - Edge recording (1.0M CBR).
3
Click Save.
This creates the following settings.
- Encoding mode: H.264
- Video bit rate mode: Constant bit rate
- GOP length: 25
- Bit rate: 1000 kbit/s
Video
61