Item
Description
DSCP field
Range: [0...63]. DSCP (Differentiated Services Code Point) uses the
first 6 bits of the ToS (Type of Service) field in the header of IP
packets for packet classification purposes. The bit pattern in the field
indicates the type of service and forwarding behavior at the next node.
With 26 bits, up to 64 network service types can be defined. RFC 2724
(see - http://www.ietf.org/rfc/rfc2474.txt) describes the Differentiated
Services (DS) field and the DiffServ Code Point. See also the note on
Differentiated Services later in this chapter.
Connection
priority
Parameter intended for use with MX Software Development Kit.
Multicast TTL
Range: [0...127]. Specify the number of routers (hops) that multicast
traffic is permitted to pass through before expiring on the network.
RTP control mode
Select the transport protocol to control the stream.
None
No transport protocol selected.
FloodGuard
Flooding prevention mechanism. For more
information, see the note on FloodGuard later
in this chapter.
RTCP
Real-Time Control Protocol, a network control
protocol for use in communications systems to
control streaming media servers.
Stream type
UDP + RTP
Default setting. Plain RTP stream over UDP.
UDP + RTP + NKF
Adds an extended RTP header for TKH
Security applications requiring extra
information.
RTP type (0 =
auto)
Default value: [0]. This parameter determines the RTP payload format
(e.g. H.264, MPEG-2/4, or audio). To avoid an RTP type conflict, the
values specified on both sides of the connection must be the same.
The default value of "0" automatically sets the appropriate media type.
You are advised not to change this setting.
Link loss alarm
timeout
Range: [1...1000] s. Default: 10 s. Time in seconds before alarm sent.
12.3.6
Receiver 1
Audio > Advanced > Receiver 1
Audio
104
