TC Electronic Studio Konnekt 48, Руководство пользователя

Страница: 56 / 72

54
FABRIK R STUDIO
Tweak section
In this section, all parameter adjustments are made.
Parameters are organized in 4 different layers/pages.
Level
Color
Modulation
Time
There are a couple of different ways of altering the
parameter values:
• Grab and move the icon (e.g. TIME) in any direction.
This way of changing parameter values gives an excel-
lent intuitive feeling.
• You can of course also change parameter values by
grabbing the parameter value fields and move the
mouse up or down.
• Finally, values can be entered numerically by double-
clicking on the parameters value fields and entering
values using the keypad.
0 dBFS
- 0.5
-1
-2
-3
-4
-5
-6
-8
-10
-12
-14
-16
-18
-20
-22
-24
-30
-36
-42
-48
-56
-64
-72
Meters
The list below shows the exact distribution of value
readings on the meter segments on both IN and OUT
meters. A precise reading close to 0dBFS and around key
values such as -18, -20 and -24 dBFS is imperative and
this distribution takes these key values into consideration.
O/L - Overload indication
Internal overload is indicated via the O/L indicators
located between the In/Out meters. Internal overload may
occur at certain extreme parameter settings even when
the In Level meters show reasonable levels.
Use the In/Out parameters to compensate.