TC Electronic Studio Konnekt 48, Руководство пользователя

Страница: 39 / 72

default to “Master” after TALK has been used.
Instead the TALK button has a latching and a
momentary function.
Latching: Press TALK once to activate “talk”. Press
once more to deactivate “talk”.
Momentary: Press and hold to speak. Release to
return to normal.
TUNER (SHIFT + TALK)
The lightring around the encoder can also be used as
a convenient tuner if you e.g. have a guitar or a bass
plugged into one of the channel preamps on the front
of Studio Konnekt 48. The tuner on the Studio
Kontrol remote has a strobe and a point mode just as
the tuner on the Tuner page. The selected mode
follows the mode selected on the TC Near tuner page.
Default mode is: Point mode.
15 MASTER
This is the default setting for the remote that assigns
the encoder to control the master volume.
16 CH on/off - (Channel on/off)
With the CH on/off activated (LED is lit) the 6 buttons
in the top of the remote can be used to mute/un-mute
channels. As explained previously, these buttons have
six primary assignments: MIC1, MIC2, S/PDIF, CH
5/6, CH 7/8 and DAW.
The Channel on/off function will also work on
channels assigned to the 6 USER assignments.
Enable shift and press one of the top 6 buttons.
17 SHIFT
Press to allow secondary functions. Some functions
require that you press SHIFT once. Some functions
require that you press and hold SHIFT. Please refer to
the descriptions on this and the previous pages.
STUDIO CONTROL
37