TC Electronic REVERB 4000, Руководство пользователя

Страница: 20 / 61

18
UTILITY -
FRONT PANEL OPERATION
Card Copy
The Copy Function can be used to load or
backup the User bank to or from a standard
PCMCIA card.
Copy
Select between:
“Card to User” or
“User to Card”
Warning !
The “Copy From” function handles the
entire bank. Therefore backing up or
retrieving banks will destroy and overwrite
the presets in the target bank.
Execute Copy
Press ENTER to copy according to your
selection above.
Misc.
Auto Info
Range: On/Off
When Auto Info is set to on, information on
Algorithm and Decay time of the current preset
is saved as a text and will be displayed on the
Recall page.
Format Card
Press ENTER to format the PCMCIA card
present in the slot.
Execute Dump
Press ENTER to MIDI Dump.
MIDI Mapping
It is possible to map any incoming program
changes to recall any preset in the Factory,
User or Card bank.
Mapping
Normal:
In Normal mode all banks can be accessed for
program changes. Bank selection is done via
Ctrl 0 (MSB) and Ctrl 32 (LSB):
• Controller 0 must be set to 0 in all cases.
• Controller 32 value must match the bank
number you wish to address according to the
table below.
Ctrl 32 value 0 - Halls
Ctrl 32 value 1 - Rooms
Ctrl 32 value 2 - Plates
Ctrl 32 value 3 - Effects
Ctrl 32 value 32 - User bank
Ctrl 32 value 64 - Card bank
Following mapping modes are also available:
• Into Factory
• Into User
• Into Card
• Into Map
When “Into Map” is selected the Reverb 4000
maps incoming program changes according to
the MIDI Mapping described below.
Map From - Map To
Select which incoming program change to map,
and which preset to map to.
Example:
You wish to send program change 1 to the
Reverb 4000 and recall preset 30 in Bank 1
(Rooms). Use the following setting:
Map From 1
Map To 1-30