TC Electronic REVERB 4000, Руководство пользователя

Страница: 26 / 61

24
THE TC ICON EDITOR -
BASIC OPERATION
Basic Operation
The Icon Link key in the upper left corner
allows you to navigate between two main
pages/modes.
Setup/Select pages
Via the Select & Setup pages you access
overall settings and choices like:
• Selection of which connected unit to operate.
• TC Icon settings such as display and Fader-
appearance.
On the Select page illustrated above all
connected units will appear. Press one of the
units indicated on that page to access the unit.
Auto page
This page is for time-code operations and
redundant when operating a Reverb 4000.
Operating pages
Press the ICON key in the upper left corner to
select these pages or press the unit on the
Select pages.
These pages are relevant to one specific unit.
Operating Pages
• Library pages handle operations such as
preset Recall, Store, Delete and bank
handling for backup
• System pages handle overall Clock Settings,
I/O settings and network settings.
• Engine pages are where you control all
algorithm specific processing parameters.
Renaming presets
All user presets can easily be renamed.
Click on the CURRENT ENGINE NAME key on
the Store page and a keyboard display will
open.
The preset is not stored by entering the
name and pressing ENTER.
To actually store a preset the STORE key
must be pressed on the Store page.
Link
The LINK key allows you to assign any
algorithm parameter to any of the 6 Faders.
Thereby you are not limited to operate only the
parameters visible on the current page.
To assign a parameter
• Press the LINK key.
• Select the Fader you wish to link a parameter
to, by pressing the field just above the fader.
• Press the parameter you wish to link to the
selected fader.
ICON key
LINK key