TC Electronic DB6, Руководство пользователя

Страница: 55 / 76

Loudness Wizard
English Manual (2014-03-05) 51
tive to output level. For linear audio and most
codecs, set the Threshold parameter to -1 dBFS.
For AC3, setting the Threshold parameter be-
tween -3 and -6 dBFS is recommended.
Link parameter
The Link parameter defines which limiters work
together.
C, LR, LFE setting
– If the threshold is exceeded in the Center
channel, only that channel is limited.
– If the threshold is exceeded in one of the other
Main channels, all Main channels excluding
Center are limited.
– If the threshold is exceeded on the LFE chan-
nel, only that channel is limited.
LCR, LFE setting
– If a threshold is exceeded in one of the Main
channels, all Main channels are limited.
– If the threshold is exceeded on the LFE chan-
nel, LFE is limited independently.
All setting
– If a threshold is exceeded in any channel, all
channels are limited.
Profile parameter
True-peak limiters may use different profiles.
And although they are all adaptive, these pro-
files have all been optimized for different appli-
cations. Use a profile that suits the signal being
processed.
The available settings are:
– Dynamic
– AC3 Codec
– Universal
– Loud
– Voice
Please note that if the AC3 Codec Profile is used,
the limiter threshold for the C channel is actually
3 dB higher than set.
Output section
Output Fader parameter
The Output Fader parameter is a post-limiter
fader. Parameter range is from -100 dB to 12 dB.