TBK vision TBK-NVR2200 Series Скачать руководство пользователя страница 22

Страница: 22 / 216

TBK-NVR2200 Network Video Recorder User Manual V2

www.tbkvision.com

Step 1

Go to Menu > Settings > General > More Settings by operating the front control panel or the
mouse.

Step 2

Check and remember NVR ID#. The default ID# is 255. This ID# is valid for all the IR remote
controls.

Step 3

Press the DEV button on the remote control.

Step 4

Enter the NVR ID# you set in step 2.

Step 5

Press the ENTER button on the remote.

If the Status indicator on the front panel turns blue, the remote control is operating properly. If the

Status indicator does not turn blue and there is still no response from the remote, please check the
following:

⚫

Batteries are installed correctly and the polarities of the batteries are not reversed.

⚫

Batteries are fresh and not out of charge.

⚫

IR receiver is not obstructed.

⚫

No fluorescent lamp is used nearby

If the remote still can’t function properly, please change a remote and try again, or contact the

device provider.

Содержание TBK-NVR2200 Series

























































































































































































































Результаты поиска

Содержание TBK-NVR2200 Series

Отзывы:

TBK vision TBK-NVR2200 Series, Руководство пользователя, Страница: 22 / 216

Результаты поиска

Содержание TBK-NVR2200 Series

Отзывы: