TBK vision TBK-NVR2200 Series Скачать руководство пользователя страница 128

Страница: 128 / 216

TBK-NVR2200 Network Video Recorder User Manual V2

www.tbkvision.com

128

8.5 Handling Exceptions Alarm

Purpose:

Exception settings refer to the handling action of various exceptions, e.g.

⚫

HDD Full:

The HDD is full.

⚫

HDD Error:

Writing HDD error or unformatted HDD.

⚫

Network Disconnected:

Disconnected network cable.

⚫

IP Conflicted:

Duplicated IP address.

⚫

Illegal Login:

Incorrect user ID or password.

⚫

Record/Capture Exception:

No space for saving recorded files or captured images.

⚫

Hot Spare Exception:

Disconnected with the working device.

Steps:

Enter Exception interface of System Configuration and handle various exceptions.

Menu> Configuration> Exceptions

Please refer to

Chapter 8.6 Setting Alarm Response Actions

for detailed alarm response actions.

Figure 8-13

Exceptions Setup Interface

8.6 Setting Alarm Response Actions

Purpose:

Alarm response actions will be activated when an alarm or exception occurs, including Event Hint

Display, Full Screen Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Trigger Alarm
Output and Send Email.

Event Hint Display

When an event or exception happens, a hint can be displayed on the lower-left corner of live view

image. And you can click the hint icon to check the details. Besides, the event to be displayed is
configurable.

Step 1

Enter the Exception settings interface.

Содержание TBK-NVR2200 Series

























































































































































































































Результаты поиска

Содержание TBK-NVR2200 Series

Отзывы:

TBK vision TBK-NVR2200 Series, Руководство пользователя, Страница: 128 / 216

Результаты поиска

Содержание TBK-NVR2200 Series

Отзывы: