TBK vision TBK-NVR2200 Series, Руководство пользователя, Страница: 213 / 216

TBK-NVR2200 Network Video Recorder User Manual
www.tbkvision.com 213
Simultaneously press Ctrl and C to exit the ping command.
Step 6 Verify the hardware of the PC is good enough.
Simultaneously press Ctrl , Alt and Delete to enter the windows task management interface,
as shown in the following figure.
Figure 16-1 Windows task management interface
⚫
Select the “Performance” tab; check the status of the CPU and Memory.
⚫
If the resource is not enough, please end some unnecessary processes.
Step 7 Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please contact the engineer from TBK Vision to do the further process.
⚫
When using the NVR to get the live view audio, there is no sound or there is too much
noise, or the volume is too low.
Possible Reasons:
− Cable between the pickup and IP camera is not connected well; impedance mismatches or
incompatible.
− The stream type is not set as “Video & Audio”.
− The encoding standard is not supported with NVR.
Step 1 Verify the cable between the pickup and IP camera is connected well; impedance matches
and compatible.