TBK vision TBK-NVR2200 Series Скачать руководство пользователя страница 202

Страница: 202 / 216

TBK-NVR2200 Network Video Recorder User Manual V2

www.tbkvision.com

202

⚫

Level:

Set the user level to Operator or Guest. Different user levels have different operating

permission.

Operator:

The

Operator

user level has permission of Two-way Audio in Remote Configuration

and all operating permission in Camera Configuration by default.

Guest:

The Guest user has no permission of Two-way Audio in Remote Configuration and

only has the local/remote playback in the Camera Configuration by default.

⚫

User’s MAC Address:

The MAC address of the remote PC which logs onto the NVR. If it is

configured and enabled, it only allows the remote user with this MAC address to access the
NVR.

Step 4

Click the

button to save the settings and go back to the User Management interface. The

added new user will be displayed on the list, as shown in Figure 15-6.

Figure 15-6

Added User Listed in User Management Interface

Step 5

Select the user from the list and then click the button to enter the Permission settings
interface, as shown in Figure 15-7.

Figure 15-7

User Permission Settings Interface

Step 6

Set the operating permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.

Содержание TBK-NVR2200 Series

























































































































































































































Результаты поиска

Содержание TBK-NVR2200 Series

Отзывы:

TBK vision TBK-NVR2200 Series, Руководство пользователя, Страница: 202 / 216

Результаты поиска

Содержание TBK-NVR2200 Series

Отзывы: