TBK vision TBK-NVR2200 Series Скачать руководство пользователя страница 176

Страница: 176 / 216

TBK-NVR2200 Network Video Recorder User Manual V2

www.tbkvision.com

176

Figure 12-13

Local HDD Settings Interface

Step 7

Select the Group number for the current HDD.

The default group No. for each HDD is 1.

Step 8

Click the

button to confirm the settings.

Figure 12-14

Confirm HDD Group Settings

Step 9

In the pop-up Attention box, click the

Yes

button to finish the settings.

12.3.2 Setting HDD Property

Purpose:

The HDD property can be set to redundancy, read-only or read/write (R/W). Before setting the

HDD property, please set the storage mode to Group (refer to step1-4 of Chapter Setting HDD
Groups ).

A HDD can be set to read-only to prevent important recorded files from being overwritten when

the HDD becomes full in overwrite recording mode.

When the HDD property is set to redundancy, the video can be recorded both onto the

redundancy HDD and the R/W HDD simultaneously so as to ensure high security and reliability of
video data.

Step 1

Enter the HDD Information interface.

Menu > HDD> General

Содержание TBK-NVR2200 Series

























































































































































































































Результаты поиска

Содержание TBK-NVR2200 Series

Отзывы:

TBK vision TBK-NVR2200 Series, Руководство пользователя, Страница: 176 / 216

Результаты поиска

Содержание TBK-NVR2200 Series

Отзывы: