TBB power MPPT, Руководство пользователя, Страница: 32 / 36

MPPT charge controller User Manual
2
and heat dissipation.

If the ambient temperature and
ventilation is normal, please
contact your dealer.
09 PSU_LV Auxiliary power of the
charger is too low.
Please contact your dealer.
10 PSU_LV_HD
11 Sam_HD_Fault
The Charger has
sampling failure.
12 EEPROM_Fail
Abnormal storage of
the charger.
13 EPO(Remote OFF)
2P phoenix terminal
didn’t insert into the
EPO of the charger.

Insert the 2P phoenix terminal
into the EPO of the charger. And
charger will return to normal
operation after the failure
disappears.

If no, please contact your dealer.
Warning
01 U_BAT_OV
Battery voltage is too
high.
Check whether the battery settings
of the charger are consistent with
the battery configuration.
02 U_BAT_LV
Battery voltage is too
low.
Please check the battery voltage.
Wait the charger charging until the
battery voltage normally.
03 Cur_Limit
Charging current over
range.

Check whether the maximum
charging current is over range.

Check whether the charger
model setting is correct.
If the settings are correct, please
contact your dealer.
04 BAT_UnConnect
Battery connection
failure. Please check the battery circuit
breaker.
06 T_BAT_OT
Battery temperature
is too high

Check whether ambient
temperature is in range.

Check that the charger
installation environment is well
ventilated.

If the ambient temperature is too
high or is not ventilated well,
please improve its ventilation
and heat dissipation.
08
TypeSet_Mismatch
_Err The charger model
setting in not correct.

Check whether the charger
model setting is correct.

And change the model settings.
14 NTC_Board_Fault
The NTC of the
charger is fault.
Please contact your dealer.