background image

USER INTERFACE

5-9

Model C303 & C314

User Interface 

 5

RINSE/SANITIZE

This screen allows the operator to rinse or sanitize 

the freezing cylinder(s).

Use the AUTO (- ->) and OFF (<- -) keys to select 

either RINSE or SANITIZE, and then press the 

MENU SELECT key.

Use the AUTO (- ->) or OFF (<- -) keys to select bar-

rel 1, 2, or 3. Push the MENU SELECT key to start 

the sanitize mode.

SERVICE MENU

This screen allows the authorized service technician 

to access service information. Press the MENU 

SELECT key to return to the operator menu.

Syrup Out Indicator

If the word "OUT" appears in one of the columns below 

the word "AUTO", it indicates a lack of syrup or syrup 

pressure being supplied for the indicated freezing 

cylinder. If the unit is out of syrup, the product light will 

illuminate and a warning tone will sound for that freezing 

cylinder. At this time, replace the appropriate Bag-in-Box 

(BIB). As a safety feature, feature, the refrigeration 

system automatically stops to prevent a freeze-up in the 

freezing cylinder (barrel).

If a syrup out condition occurs on one barrel, that barrel 

will enter the Hold mode. During the Hold mode, 

refrigeration remains off, the beater continues to run if the 

barrel is less than 50°F (10°C) and the

CO

2

 solenoid for that barrel is closed to prevent the 

dispensing of product. The other barrels will not be 

affected.

CO

2

 Out Indicator

On the LCD, if the word OUT appears next to the word 

CO

2

 it indicates a lack of CO

being supplied to the 

freezer. The product light will also illuminate and a 

warning tone will sound. This will continue until the CO

2

 

is replaced. If the CO

2

 is not replaced within 1-minute, 

the machine will shut down and a fault message will 

appear.

Water Out Indicator

On the LCD, if the word "OUT" appears next to the word 

"WATER", it indicates a lack of water being supplied to 

the freezer. In addition, the product light will illuminate 

and a warning tone will sound. This will continue until the 

proper amount of water is supplied to the freezer. If the 

water is not supplied within 1-minute, the machine will 

shut down.

RINSE / SANITIZE

RINSE

SANITIZE

EXIT

- - -

L

E

S

>

-

-

-

-

<

SANITIZE

- - -

L

E

S

>

-

-

-

-

<

BARREL  

1 2 3  

 

 

       EXIT

OPERATOR MENU

A B C D E F G H I

SERVICE MENU

L

E

S

>

-

-

-

-

<

AUTO

AUTO

OUT

OK

CO2-OK

WATER-OK

AUTO
OUT

AUTO

AUTO

OK

OK

CO2-OUT

WATER-OK

AUTO
OUT

AUTO

AUTO

OK

OK

CO2-OK

WATER-OUT

AUTO
OUT

Содержание C303






















































Отзывы: