Taylor-Dunn B0-248-48AC, Руководство по эксплуатации, устранению неисправностей и замене запасных частей

Страница: 17 / 232

Safety Rules Page 3
SAFETY RULES AND OPERATING INSTRUCTIONS
1. Make sure the key-switch is in the “OFF” position, then remove
the key.
2. Place the forward-reverse switch in the center “OFF” position.
3. Set the park brake.
4. Place blocks under the front wheels to prevent vehicle movement.
5. Disconnect the main positive and negative cables at the batteries.
Before working
on a vehicle:
These vehicles are not designed to be driven on public roads or
highways. They are available in maximum designed speeds ranging
from 6 to 16 mph. Do not exceed the maximum designed speed.
Exceeding the maximum designed speed may result in steering
difficulty, motor damage, and/or loss of control. Do not exceed locally
imposed speed limits. Do not tow this vehicle at more than 5 mph.
SAFETY RULES AND GUIDELINES
It is the responsibility of the owner of this vehicle to assure that the operator understands the various controls
and operating characteristics of this vehicle (extracted from the American National Standards Institute
Personnel and Burden Carriers ANSI B56.8). As well as, following the safety rules and guidelines outlined in
ANSI B56.8 and listed below.
These vehicles are designed for driving on smooth surfaces in and around facilities such as industrial plants,
nurseries, institutions, motels, mobile home parks, and resorts. They are not to be driven on public highways.
Refer to
Vehicle Operational Guidelines, Safety Guidelines
section for important safety information
regarding operating this vehicle.
Read and follow all of the guidelines listed below. Failure to follow
these guidelines may result in severe bodily injury and/or property