tayco Kip, Руководство по установке

Страница: 22 / 25

Kip community table – 2 Surfaces
Figure 12
Tools & Hardware Needed
8485-0275 8540-0545 8540-1280
Drill Robertson # 2 Hex Bit Gable Cover
Bracket (4X) #10 X 11/16" Oval
Head Screw (8X) 1/4-20 X 35MM
JCB BOLT (16X)
WARNING – To reduce the risk of
fire, electric shock, or injury to
persons:

For indoor use only.
 Do not use with extension
cords.

Do not try to open the unit
for any reason.
12.
Set the power grommet into
the hole and then secure it with
mounting screws provided,
(Figure 12).
Note: Make sure that the unit
is securely installed to the
mounting surface.
13.
Affix the faceplate by pressing
it against the main unit.
14.
Place the USB charger on the
desired surface and use two
screws to fasten it onto the
wood surface.
Note: USB chargers are extra.
15.
Lay-in the electrical wires and
communication cables inside
wire troughs, (Figure 12A).
16.
Plug the power cord(s) or
adapter to nearest wall or floor
outlet.
17.
Please refer to pages 11-12.
Follow Steps 21 - 23 to install
the gable covers and bridges.
FEBRUARY 2020 kip 19