tayco Kip, Руководство по установке

Страница: 11 / 25

Kip community table – 1 Surface
Figure 9
Figure 10
Tools & Hardware Needed
8540-0789_SCREW 8540-1280
Drill Robertson # 2 Hex Bit #10 X 1" Pan Head
Screw (19X) 1/4-20 X 35MM JCB
Bolt (6X)
24.
Align and flush the gable cover
mount channel to the side face
of the bridge before tightening
the screws, (Figure 9).
25.
Tighten the 1/4-20 X 35mm JCB
bolts, (Figure 10).
26.
Securely fasten the gable cover
mount channel, using #10 X 1”
Pan Head Screws into the pre-
drilled holes of the gable,
(Figure 10).
27.
Follow Steps 6 to 14 to install
the other gable and for each
gable cover mount channel
required.
Continued on the next page >>
FEBRUARY 2020 kip 8