tayco Kip, Руководство по установке

Страница: 17 / 25

Kip community table – 2 Surfaces
Figure 2
Figure 3
Tools & Hardware Needed
8540-0789_SCREW MENDPLATE-BLK
Drill Rubber Mallet Robertson # 2 #10 X 1" Pan Head
Screw (8X) Top Bolt (4X) Mending Plate (2X)
2.
Place the top bolt into the
groove. Tighten the bolt using
a box wrench, (Figure 2).
3.
Attach the mending plates,
using #10 X 1” Pan Head
Screws, (Figure 2).
4.
Position the bridge on the
surface, (Figure 3).
Continued on the next page >>
FEBRUARY 2020 kip 14