TAVRIDA ELECTRIC ISM Shell_2 Series, Руководство по применению

Страница: 28 / 83

28
Position indicator mounting
Position indicator mounting is shown below step by step. (Figures 40, 41, 42, 43, 44, 45). ISM main contacts shall be
in closed position.
Note: Bending radius of the position indicator flexible link shall be not less than 40 mm to prevent decreasing
performance or malfunction.
There are two possibilities (left, right)
to connect the flexible link of the
position indicator.
Figure 40
Unscrew the self-tapping screws of
transparent cover. Remove the cover.
Figure 41
Drop the boss of the wire horizontally
into slot. Insert end of the sheath into
V-shape spring contact. So the wire
will be packed in groove between the
slot and the spring.
Figure 42
Return the cover to its place
and fix it.
Figure 43
Fasten the indicator to front of switchboard
and adjust it as shown here for both closed
and opened states of the switching module.
Figure 44
Position indicator shows
that main contacts are open
Figure 45
Position indicator shows
that main contacts are closed
3