Taurus TF-WS7-2, Руководство по сборке и эксплуатации

Страница: 10 / 68

WS7
10
+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The
use of solvents should be strictly avoided. Also, make sure that no liquids (e. g.
sweat) get into the openings of the equipment.
2.2 Faults and Troubleshooting
The equipment runs through regular quality controls during production. Nevertheless,
errors or malfunctions on the equipment may occur. Individual parts are often the
cause of faults and replacement is usually sufficient. Please use the following overview
to see the four most common errors and how to repair them. If the equipment still
does not work properly, please contact your contract partner.
Problem Cause Solution
Scraping noises
Cable or pulleys not
running smoothly or are
damaged
Perform a visual check of the route
of the cable or of the pulley or of
the pulley guide
Weight is
suspended in the
air
Cable is too tightly
stretched
Readjust cable tension
Cable is not taut Cable is too slack Readjust cable tension
Squeaking &
cracking noises
Screws are either too
loose or too tight
Check that screws are correctly
tightened or lubricate