Taurus SEBR7140, Руководство по сборке и эксплуатации

Страница: 40 / 60

40
Elite Complete Trainer
Step 14: Assembly of the Accessories, Part 4
1. Attach the small footplate (94) to the base frames (1 & 4) with two T-shaped pins (62).
࣑
ATTENTION
Before using the jammer arms, the bearing frames must be pushed to the lowest position.
2. Insert the link parts (90) into the uppermost hole of the upright frames (21 & 22) and secure with
one T-shaped pin (62) each.
3. Attach the upright frames (91 & 92) to the link parts (90) with one shaft (95), two bolts (96) and
two washers (97) each. Tighten the bolts and cap each bolt with one plastic cover (14).
4. Attach one handle tube (93) to each upright frame (91 & 92) by pushing them thorugh one of
the adjustment holes.
⚠
CAUTION
Make sure the handle tube (93) leads completely through the hole and engages with the small
pin.
5. Attach the pushing rod (89) to the lowest holes of the upright frames (91 & 92) with two
T-shaped pins (62).