Taurus SEBR7140, Руководство по сборке и эксплуатации

Страница: 19 / 60

19
Step 2: Assembly of the Main Frame, Part 2
L
NOTICE
+ Do not tighten the bolts and nuts yet. Otherwise the components might not fit.
+ Once tightened, each bolt connection must be capped with plastic covers (14) like shown.
1. Attach the upper back link tube (5) to the rear struts of the left and right frames (3 & 2):
1.1. From the side: with two bolts (19), four washers (11), one L-shaped plate (18), two nuts (10) and
four plastic covers (14) on each frame.
1.2. From the back: with two bolts (20), four washers (11), two nuts (10) and four plastic covers (14)
on each frame.
2. Attach the lower back link tube (5) to the rear struts of the left and right frames (3 & 2) with two
bolts (12), four washers (11), one small reinforcing plate (7), two nuts (10) and four plastic covers
(14) on each frame.