Taurus SEBR7140, Руководство по сборке и эксплуатации

Страница: 17 / 60

17
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
࣑
ATTENTION
Make sure to align all washers used throughout the entire assembly the correct way. Otherwise
it is not possible to attach the protecting plastic covers. Please refer to the drawings below.