tau WIRELESS, Инструкция по эксплуатации

Страница: 13 / 20

TAU-WIRELESS
13
This instruction manual contains important information regarding installation safety; therefore read
all instructions carefully before proceeding with installation. Keep this manual in a safe place for fu -
ture use.
To ensure the maximum safety, in consideration of the hazards that may arise during installation and
use of TAU-Wireless, the installation procedures must be performed in full compliance with the law,
current standards and regulations.
According to the most recent European legislation, the automation of a door or gate is subject
to the specifications of the Machinery directive 2006/42/EC and more specifically to the stand -
ards: EN 13241-1 (harmonised standard); EN 12445; EN 12453 and EN 12635, which enable decla-
ration of conformity with the Machinery Directive.
This manual is intended exclusively for technical personnel qualified for installation; no other informa -
tion in this document may be considered of interest to the final user.
• Use of TAU-Wireless other than as specified in this instruction manual is strictly prohibited; im -
proper use constitutes a risk of physical injury or damage to objects.
• Do not perform any modifications to parts unless envisaged in these instructions; operations of
this kind will only lead to malfunctions; TAU declines all liability for damage caused by modified
products.
• TAU-Wireless must operate exclusively for direct TX-RX interpolation.
• For electrical connections, use suitable wires with sections as specified in the chapter “connec -
tions”.
• Ensure that the electrical power supply and other operating parameters correspond to the values
specified in the table “technical specifications”.
• The installation of safety devices on power-operated doors and gates is subject to the following
standards:
• EN 12453 Industrial, commercial and residential doors and gates. Safety in use of power-operated
doors and gates - Requirements
• EN 12978 Industrial, commercial and residential doors and gates. Safety devices for power-operat -
ed doors and gates – Requirements and test methods.
The installation and connection of TAU-Wireless with the aim of obtaining a safety device, without
meeting the requirements of these standards constitutes a negligent and deliberate violation of the
law!
Specific warnings regarding the suitability of use of this product in relation to the directive “Electro -
magnetic Compatibility“ 2004/108/EC and subsequent amendments 92/31/EEC and 93/68/EEC:
This product has undergone testing for electromagnetic compatibility in the most critical situations of
use, in the configurations as envisaged in this manual and in conjunction with the articles stated in the
catalogue produced by TAU s.r.l. Electromagnetic compatibility may not be guaranteed if the product
is used in different configurations or with products not envisaged herein. Use of the product in such
situations is strictly prohibited unless the installer has verified that all requirements as envisaged by
the directive have been met.
EC DECLARATION OF CONFIRMITY
We hereby declare that our product:
Wireless system (900TWC - 900TWM)
complies with the following relevant provisions:
1999/5/CE Radio equipment and telecommunications terminal equipment
EN 954-1:1996 Class 2
The legal Representative
_________________________________________
Loris Virgilio Danieli