Tatu Marchesan SDA CP, Инструкция по эксплуатации

Страница: 67 / 79

66
OPTIONAL OPTIONAL
OPTIONAL OPTIONAL
OPTIONAL
Note: AFTER TO MAKE THE ADJUSTMENT ON THE SEEDS QUANTITY, IS NECESSARY TO
ADJUST THE SENSOR (A), SO THAT IT IS LINED UP WITH THE MAGNET (B) TO THE
SEED SHAFT, TO A DISTANCE OF 3 A 5 MM.
A
B
Tatu Electronic Hectarimeter
How to operate and consult PARTIAL HECTARE and TOTAL HECTARE:
When press the keyboard the display is turned on and the battery status is showed
for five (05) seconds. After this time the display shows the message of the
PARTIAL HECTARE.
If you press again the keyboard the display shows the message of the TOTAL
HECTARE. In case of any keyboard had been pressed in thirty (30) seconds, the system
come back automatically to the sleep mode (Turn off).
The operation way to configure the equipment:
Pressing the keyboard the display is turned on and the name Marchesan and
the battery status are showed for five (05) seconds, after this time the display will show
the message of the
PARTIAL HECTARE. To reset the Partial Hectare, hold pressed the
keyboard for four (04) seconds, will appear the option to reset pressing the
keyboard
not reset and pressing the keyboard yes reset.
Pressing again the keyboard , the display will show the TOTAL HECTARE, hold
pressed simultaneously the keyboards and for five (05) seconds and the
display will get into the configuration menu, pressing the keyboard will appear
the number of returns and will appear in the display the option to insert the quantity of
rows, pressing the keyboards or . After inserting the quantity of rows press the
keyboard , to adjust spacing between the rows pressing the keyboards and
oooo insert the spacing rows in millimeters. After inserting the data and wait thirty (30)
seconds, so that the system come back automatically to the sleep mode (turn off),
considering that way inserted values.