Tatu Marchesan SDA CP Скачать руководство пользователя страница 75

Страница: 75 / 79

Double Discs Maintenance

Periodically it is necessary to make the maintenance in offset double discs of

the seeder, following the instructions below:

- Period for maintenance: Approximately to every 500 hectares seeded.

- Remove the protective hubcap (A), after loosening the mounting bolts.

- Wash the hub with diesel or kerosene for remove the old grease.

- Check for the looseness in the bearing, if necessary adjust them through the

slotted nut.

- Add new grease in the inner part of the hub together to the bearings; as well

as in the chamber of the hubcaps.

- Install the hubcaps again, tightening the bolts.

Daily it is necessary to make a general

cleaning in each seed metering. For this it is
enough to remove the seed plate and
observe the cutoff mechanism working. By
doing so, the best seeding stand will be
assured.

Cleanness of the Large Seed Metering

When equipped with Horizontal Seed Plates.

MAINTENANCE

IMPORTANT: WHEN USE GRAPHITE POWDER, OR

TREATED/INOCULATED SEEDS, IT IS
NECESSARY TO CLEAN THE SYSTEM
TWICE A DAY.

Содержание SDA CP
















































































Результаты поиска

Содержание SDA CP

Отзывы:

Бренды по названию

Популярные бренды

Tatu Marchesan SDA CP, Инструкция по эксплуатации

Результаты поиска

Содержание SDA CP

Отзывы:

Бренды по названию

Популярные бренды