Tatu Marchesan RTA-6, Инструкция по эксплуатации

Страница: 17 / 35

16
SET SET
SET SET SET-UP INSTRUCTIONS
-UP INSTRUCTIONS
-UP INSTRUCTIONS -UP INSTRUCTIONS -UP INSTRUCTIONS
Joining the Shaft to the Power Point
Before starting the operation check the lenth ot the shaft. If necessary, shorten
it by cutting equal parts of the internal and external hoop.
- Join the shaft to the power point, paying attention to the position of the
terminals of the little crosses taking care when taking it apart (see drawing bellow).
Errouneus assembly will cause excessive vibration, which is hamfull to the transmission.
Note: IT IS NECESSARY TO GIVE FINISHING IN THE PARTS CUT (MALE/FEMALE), TO MAKE
THIS USING A FILE, AFTER THAT TAKE OUT THE FILINGS AND LUBRICATE THE MALE
PART WITH A FINE LAYER OF GREASE.
Nota: THE SUPPORTING BAR ASSEMBLING (A) SHOULD BE INSPECTED BEFORE COUPLING
TO THE TRACTOR.
Tractor
TPO Shaft
Cardan Shaft
Pump
Pump
Support
Regulating - Rod
Chassis
Guide
Stabilizer Arm
3rd Point
A