Tatu Marchesan PST4, Инструкция по эксплуатации

Страница: 73 / 86

71
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
PST 4
Optional
Sequence valve operation
NOTE
Wheels for fertilizer covering
NOTE
H
A
B
C
E
F
G
I
D
For the correct operation of the sequence valve and the proper alternation of the row
markers, it is necessary to always activate the command lever until the hydraulic cylinders
stroke is completed and keep the lever activated for more three or four seconds.
Never activate the hydraulic cylinders partially. Either when raising or
lowering the planter, fully activate it.
• Assemble the covering wheel fastener (A) in the arm (B).
Place the covering wheel (C) in the fastener (A). Put the arm (B)
in the support (D) using the bracket (E), bolt (F), washer and nut.
Also assemble the covering wheel (C) in the arm (B) using bolts
(G), washers and nuts.
• Then, assemble the whole set in the arm
of the fertilizer row (H) using the bolts that also
fasten the unaligned double discs. If necessary,
use the spacing plates (I).
If the fertilizer row is assembled with the right curvy fertilizer tube, the
covering wheel set must be right. If the fertilizer tube used is the left one,
the covering wheel set must be left.