background image

6

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PST 4

To the operator

Never use your bare hands to check hydraulic leaks, the high 

pressure can cause several injuries.

Never attempt to change the adjustments, clean or lubricate the 

equipment when the same is switched on or in movement.

Be careful while driving on slopes. Risk of overturn.

Prevent that chemical products (i.e.: fertilizers, treated seeds) 

make any contact with your skin or clothes.

Keep access and work places clean and free from oil and grease. 

Risk of accidents.

Never transport the equipment on highways or paved roads 

during the night. Avoid that the tractor wheels touch the drawbar in 

sharp turns.

The presence of any other people on the tractor or equipment 

is stricly forbidden.

Have extreme caution when driving under electrical power lines. 

Any contact may result in severe shocks, injuries or death.

For your protection and safety, always wear adequate clothes 

and footwear while operating the equipment.

Always use the safety locks to carry out maintenance operations 

and to transport the equipment.

Содержание PST4























































































Отзывы: