VERTICAL TOWED MIXER - TWO AUGERS
MV-30D SERIES
• Put the
cardan protection back in its working position and make sure that it is
correctly positioned.
Do not work without the PTO protections or of the transmission
shaft since there is a danger of entrapment.
Handle the transmission elements with work gloves during
connection of the tractor power take-off.
6. Make the electrical and hydraulic connections between the mixer and the tractor.
7. Remove the chocks and put them on their support or unlock the parking handbrake
completely.
Driving with the parking brake on can cause the mixer wheels to
blow out due to overheating, which can lead to accidents.
9. Before start working with the mixer, the operator must:
• Adjust correctly the position of the mixer control system and the tractor driving seat
so that both the driving position and access to the mixer controls are comfortable and
don’t remain in a forced position.
Adjust the driver's seat in the most ergonomic position for
handling the tractor and mixer, thus avoiding possible ailments or
back injuries.
• Adj
ust the rear-view mirrors of the tractor so that both driving visibility and direct
visibility on the different mixer mechanisms are optimal.
The correct adjustment of the rear-view mirrors will allow the
mixer driver to reduce the risk of accidents
Tatoma Ag Equipments Corp. Located in Colcord, OK. Phone (918) 422-4271
- 50 -
